2001 Kaeser Type SM-11 Dual Air Compressor, Part #1.9623.80120

Specifications:

Tank Size…………….. 80 Gallon

Horse Power………… 10 HP

Cfm……………………  36

Psig…………………… 145

Hz/RPM……………… 60/3600

Voltage……………… 208 v

This is a dual 10 HP Air Compressor System with (1) 80 Gallon Tank, a shared Dryer.

It is networking capable to monitor from office. The two compressors can be run

Together  or individually. It is in very good condition and may be inspected under power.

Parlec Series 975 Presetter

Stock #1004

2004 HEM CYCLONE AUTO MITERING HORIZONTAL BAND SAW

Stock #996

SPECIFICATIONS:

CAPACITY, RECTANGLE …… 16″ x 22″ @ 90 DEGREES

CAPACITY, RECTANGLE …… 16″ x 15″ @ 45 DEGREES

CAPACITY, RECTANGLE …… 16″ x 7″ @ 60 DEGREES

CAPACITY, ROUND …………… 16″

BLADE SPEED…………………… 60 TO 300 FPM VARIABLE

BLADE SIZE ……………………… 1.25″ x 0.042″ x 16′

CLAMPING PRESSURE……… 0 TO 1,000 Lbs.

HEAD FEED RATE……………… VARIABLE

AIR REQUIREMENT……………. 85 PSI

MOTOR………… …………………. 7 1/2 HP

WEIGHT…………………………….. 3,000 LBS.

1998 Amada HA-250W 10” x 10” Automatic Horizontal Band Saw   

Stock #971

Year: 1998

Manufacturer: Amanda

Model: HA-250W

Machine Type: Fully Automatic Horizontal Band Saw

Travels: 10″ x 10″ Capacity

Options: N/A

Specifications:

Rect-Cap (H)………………………. 10″

Rect-Cap (W)……………………… 11.81″

Rounds-Cap……………………….. 10″

Power…………………………………  5 HP

Blade Width………………………… 1.25″

Blade Thickness………………….  0.042″

Blade Length………………………. 11.6″

Dimensions………………………… 78.6″ x 88.8″ x 54.3″

Weight……………………………….  3,087 lbs.

1981 Bridgeport Series I

Stock #956

2 HP
Newall Digital Readout

Year: 1981

Manufacturer: Bridgeport

Model: Series I

Machine Type: Vertical Mill

Travels: N/A

Options: 2 HP Newall DRO

Cincinnati #2MI Horizontal Universal Mill

Stock #845

Serial # 2J2PiZ-124

10″ x 54 1/2″ Table

Overarm Spindle

5 HP Motor

Year: 1952

Manufacturer: Cincinnati

Model: #2 MI

Machine Type: Horizontal / Universal Mill

Travels: 54 1/2″ x 10″

Options: Serial # 2J2p1z-124 Overarm Spindle 5 HP Motor

2012 Elbo Controlli Tool Presetter for CAT 30 – CAT 40

Stock #973

Year: 2012

Manufacturer: Elbo Control

Model: Larth

Machine Type: Tool Presetter CAT 30 – CAT 40

Travels: N/A

Options: N/A

Gage Master Series 20 Optical Comparator

Stock #974

Year: N/A

Manufacturer: Gage Master

Model: Series 20

Machine Type: Optical Comparator

Travels: N/A

Options: N/A

2013 Jet JTM-2 Vertical Mill with X & Y Powerfeed

Stock #981

Year: 2013

Manufacturer: Jet

Model: JTM-2

Machine Type: Vertical Mill

Travels: 23 7/8″ x 12 1/2″

Options: 2 HP Motor R8 Taper Power Feed 9″ x 42″ Table

Specifications:

Spindle Taper…………………………………………….. R-8

Number of Axis…………………………………………..  3 (Quill)

Powerfeed…………………………………………………  X and Y-Axis

Table Size (L x W)………………………………………  9” x 42”

Quill Diameter…………………………………………….  3-3/8”

Number of Spindle Speeds………………………….. 8

Range of Spindle Speeds (RPM)………………….  80 – 2,720

Quill Down Feed Rates (IPR)………………………  .0015 – .003 – .006

Spindle Travel……………………………………………  5”

Head Movement (Deg.)……………………………….  90 R and L, 45 F and B

Max Distance Spindle to Table…………………….. 17-1/2”

Distance Spindle to Column (Max.)………………. 19”

Distance Spindle to Column (Min.)………………..  4-1/2”

Collet Capacity…………………………………………..  1/8 – 7/8

Table Longitudinal Travel……………………………..  23-7/8”

Table Cross Travel………………………………………  12-1/2”

T-Slots Number and Size………………………………  3 – 5/8”

T-Slot Centers…………………………………………….   2-1/2”

Work Table Weight Capacity…………………………  550 lbs.

Travel of Knee…………………………………………….   14-1/2”

Travel of Ram……………………………………………..  13-3/8”

Motor…………………………………………………………   2 HP, 115/230V, 1Ph

Prewired…………………………………………………….   230 volts

Overall Dimensions (L x W x H)……………………   57” x 64” x 82”

Weight……………………………………………………….  2,200 lbs.

Equipped with:

Acu-Rite Digital Readout

Power Feed for X & Y Axis

4″ Kurt Vise Included

 1987 Supermax YCM-16VS Vertical Mill

Stock #875

Year: 1987

Manufacturer: Supermax

Model: YCM-16VS

Machine Type: Vertical Mill

Travels: 16″ x 37″ x 16″

Options: 3 HP Motor R8 Taper Variable Speed

Specifications:

Table size……………………………… 9″ x 49″

Table Load Capacity……………….. 880 lbs

Longitudinal travel…………………… 37″

Cross travel…………………………… 16″

Vertical knee travel…………………. 16″

Ram travel…………………………….. 18″

Spindle speeds………………………. 60 – 4200 RPM, Variable

Spindle taper………………………….. R8

Spindle Motor…………………………. 3 HP

Collet capacity………………………… 7/8″

Quill travel………………………………. 5″

Distance spindle to table…………… 19″

Distance spindle to column……….. 5-7/16″ to 23-7/16″

Weight……………………………………. 2630 lbs.

Dimensions…………………………….. 76″(w) x 63″(d) x 78″ high

Equipped with:

3 HP Motor

X&Y Axis Power Table Feed

** Machine is in Good Condition ** DRO Does not Work